Equip your house with Heat detectors and give your worries a break from any mishappening

Are you worried about an uninvited fire which could cause harm to your family and property? Do you want to protect your family, however, are confused about how you can achieve this goal for their safety. No worries, heat detector is something that would reduce your tension and reduce the percentage of danger that could happen after a sudden fire attack. Get heat detectors installed on the ceilings of your home and get alert as soon as the temperature of the room increases due to the heating of heat sensitive materials, which may even cause a fire.  

Basically, heat detector is that part of the fire alarm system which alerts the occupants from the danger of possible fire. Do not get confused with heat detector and smoke detectors. As both are the part of the fire alarm panel and the end function of both the detectors is the same i.e. to detect upcoming fire. However, both works with a different mechanism. Heat detectors work by detecting the thermal lag or a bump up in the thermal temperature of the premises whereas smoke detector functions when the smoke from the fire starts traveling to the detector.

As the fire is to be burst out, the air starts becoming hot which eventually gives rise in the temperature of the surrounding, and this hot air enters the sensor chamber of the heat detector. When the hot air travels in the chamber it gives rise in the temperature of the chamber that directly sends an alert to the integrated circuit. This leads the alarm to produce an announcing sound depicting the occupants about the dangerous fire to occur.

Methods used by heat detectors to measure the temperature increase in the room are depicted under:

First one is predicting the presence of heat by a rate of rising technique which involves the mechanism of a rapid increase in the ambient temperature over a period of time even more than the rate of heat-detector level changes and the alarm start producing sound to alert the occupants inside.

The second method is depicting upcoming fire with smoke detectors is fixed temperature and above this fixed temperature, if the thermal lag jumps, the alarm starts beeping indicating the people inside to come out.

An important point to be noted: The principle of designing a heat detector is to provide safety to the people by notifying them from upcoming dangers. The life span of a heat detector is 8 to 10 years which is the maximum of duration during with the heat detector could work efficiently and after that, it is mandatory to replace it with the new one. Though periodic testing and maintenance are necessary to detect any mishappening or defect in the heat detector.

Qutak Security Devices are involved within the manufacturing and supplying the best quality heat detectors with efficient functioning and have come in the list of the top Fire Alarm System Manufacturer. Make a visit to Qutak, the efficient and get all your doubts clear regarding the working, installation, and maintenance of the heat detectors.

Keep emergency exits safe with Fire Exit LED

An emergency exit could be defined as the continuous and unobstructed pathway of exit to the safe place directly and making it clear with LED lights is very important to maintain the safe decorum of the building.

Many people have the thought about exit lights that these are just meant to show the people staircase and building exits. However, this is not the truth as this is the secondary purpose of exit lights. The primary purpose when building a complex is the safety of the people in any emergency conditions especially in case of fire, and making the exits clear and easy to escape should be kept in mind. In the case of fires, the presence of smoke makes the exit passage blur which results in difficulty to the people for finding the way to go out. As the first thing that happens when a fire takes place is a power outage. Due to cut off in the power the people in the building may find difficulty in searching the exits along with the presence of smoke. Under such circumstances, the fire exit led with efficient backup could literally be saving the lives by allowing them to easily escape from the premises.

As it the responsibility of the owner to make sure that all the exits are clear and visible especially in case of an emergency as the safety of the people over there is the primary priority. The exit signs with LED (light-emitting diode) technology is in demand these days as it provides easy visibility to building exits in fire situations and gives a fast exit in case of emergency circumstances usually fire. These consume lesser energy than other incandescent techniques and runs for longer even more than 10 years.  

The battery backup stays for more than 4 hours and the battery attached with these fire exit led are maintenance free and consumes 6V 4.5 AH power supply. The body of the fire exit signs is made up of white corrosion resistance metal. The laser light inbuilt in these fire exit gives a clear vision and grabs the attraction when finding the escape from the building. Any high populated building such as hospitals, educational institutions, industry, large scale manufacturing units, and other crowded places are the best users for such types of light exits.

Qutak Security Devices are counted among the best dealers and Emergency Exit Light Manufacturer when it comes to fire exits with LED technology. There you can find both single sided and double sided exit signs with a warranty of long lasting functioning. The primary goal of Qutak is to fulfill the demands of their clients regarding their safety issues and helping them in every aspect. The team of experienced and knowledgeable is involved in manufacturing all the security products with advancements and upcoming trends. You can visit Qutak Security Devices for a variety of security devices like fire alarms, fire control panels, burglar alarm, hooters, fire extinguishers, electric siren, and many other accessories.